niko
83 lines
6.0 KiB
C#
83 lines
6.0 KiB
C#
using System;
|
|
|
|
namespace System.Net.NetworkInformation
|
|
{
|
|
/// <summary>Reports the status of sending an Internet Control Message Protocol (ICMP) echo message to a computer.</summary>
|
|
// Token: 0x02000173 RID: 371
|
|
public enum IPStatus
|
|
{
|
|
/// <summary>The ICMP echo request failed for an unknown reason.</summary>
|
|
// Token: 0x04000BE9 RID: 3049
|
|
Unknown = -1,
|
|
/// <summary>The ICMP echo request succeeded; an ICMP echo reply was received. When you get this status code, the other <see cref="T:System.Net.NetworkInformation.PingReply" /> properties contain valid data.</summary>
|
|
// Token: 0x04000BEA RID: 3050
|
|
Success,
|
|
/// <summary>The ICMP echo request failed because the network that contains the destination computer is not reachable.</summary>
|
|
// Token: 0x04000BEB RID: 3051
|
|
DestinationNetworkUnreachable = 11002,
|
|
/// <summary>The ICMP echo request failed because the destination computer is not reachable.</summary>
|
|
// Token: 0x04000BEC RID: 3052
|
|
DestinationHostUnreachable,
|
|
/// <summary>The ICMP echo request failed because contact with the destination computer is administratively prohibited.</summary>
|
|
// Token: 0x04000BED RID: 3053
|
|
DestinationProhibited,
|
|
/// <summary>The ICMP echo request failed because the destination computer that is specified in an ICMP echo message is not reachable, because it does not support the packet's protocol.</summary>
|
|
// Token: 0x04000BEE RID: 3054
|
|
DestinationProtocolUnreachable = 11004,
|
|
/// <summary>The ICMP echo request failed because the port on the destination computer is not available.</summary>
|
|
// Token: 0x04000BEF RID: 3055
|
|
DestinationPortUnreachable,
|
|
/// <summary>The ICMP echo request failed because of insufficient network resources.</summary>
|
|
// Token: 0x04000BF0 RID: 3056
|
|
NoResources,
|
|
/// <summary>The ICMP echo request failed because it contains an invalid option.</summary>
|
|
// Token: 0x04000BF1 RID: 3057
|
|
BadOption,
|
|
/// <summary>The ICMP echo request failed because of a hardware error.</summary>
|
|
// Token: 0x04000BF2 RID: 3058
|
|
HardwareError,
|
|
/// <summary>The ICMP echo request failed because the packet containing the request is larger than the maximum transmission unit (MTU) of a node (router or gateway) located between the source and destination. The MTU defines the maximum size of a transmittable packet.</summary>
|
|
// Token: 0x04000BF3 RID: 3059
|
|
PacketTooBig,
|
|
/// <summary>The ICMP echo Reply was not received within the allotted time. The default time allowed for replies is 5 seconds. You can change this value using the <see cref="Overload:System.Net.NetworkInformation.Ping.Send" /> or <see cref="Overload:System.Net.NetworkInformation.Ping.SendAsync" /> methods that take a <paramref name="timeout" /> parameter.</summary>
|
|
// Token: 0x04000BF4 RID: 3060
|
|
TimedOut,
|
|
/// <summary>The ICMP echo request failed because there is no valid route between the source and destination computers.</summary>
|
|
// Token: 0x04000BF5 RID: 3061
|
|
BadRoute = 11012,
|
|
/// <summary>The ICMP echo request failed because its Time to Live (TTL) value reached zero, causing the forwarding node (router or gateway) to discard the packet.</summary>
|
|
// Token: 0x04000BF6 RID: 3062
|
|
TtlExpired,
|
|
/// <summary>The ICMP echo request failed because the packet was divided into fragments for transmission and all of the fragments were not received within the time allotted for reassembly. RFC 2460 (available at www.ietf.org) specifies 60 seconds as the time limit within which all packet fragments must be received.</summary>
|
|
// Token: 0x04000BF7 RID: 3063
|
|
TtlReassemblyTimeExceeded,
|
|
/// <summary>The ICMP echo request failed because a node (router or gateway) encountered problems while processing the packet header. This is the status if, for example, the header contains invalid field data or an unrecognized option.</summary>
|
|
// Token: 0x04000BF8 RID: 3064
|
|
ParameterProblem,
|
|
/// <summary>The ICMP echo request failed because the packet was discarded. This occurs when the source computer's output queue has insufficient storage space, or when packets arrive at the destination too quickly to be processed.</summary>
|
|
// Token: 0x04000BF9 RID: 3065
|
|
SourceQuench,
|
|
/// <summary>The ICMP echo request failed because the destination IP address cannot receive ICMP echo requests or should never appear in the destination address field of any IP datagram. For example, calling <see cref="Overload:System.Net.NetworkInformation.Ping.Send" /> and specifying IP address "000.0.0.0" returns this status.</summary>
|
|
// Token: 0x04000BFA RID: 3066
|
|
BadDestination = 11018,
|
|
/// <summary>The ICMP echo request failed because the destination computer that is specified in an ICMP echo message is not reachable; the exact cause of problem is unknown.</summary>
|
|
// Token: 0x04000BFB RID: 3067
|
|
DestinationUnreachable = 11040,
|
|
/// <summary>The ICMP echo request failed because its Time to Live (TTL) value reached zero, causing the forwarding node (router or gateway) to discard the packet.</summary>
|
|
// Token: 0x04000BFC RID: 3068
|
|
TimeExceeded,
|
|
/// <summary>The ICMP echo request failed because the header is invalid.</summary>
|
|
// Token: 0x04000BFD RID: 3069
|
|
BadHeader,
|
|
/// <summary>The ICMP echo request failed because the Next Header field does not contain a recognized value. The Next Header field indicates the extension header type (if present) or the protocol above the IP layer, for example, TCP or UDP.</summary>
|
|
// Token: 0x04000BFE RID: 3070
|
|
UnrecognizedNextHeader,
|
|
/// <summary>The ICMP echo request failed because of an ICMP protocol error.</summary>
|
|
// Token: 0x04000BFF RID: 3071
|
|
IcmpError,
|
|
/// <summary>The ICMP echo request failed because the source address and destination address that are specified in an ICMP echo message are not in the same scope. This is typically caused by a router forwarding a packet using an interface that is outside the scope of the source address. Address scopes (link-local, site-local, and global scope) determine where on the network an address is valid.</summary>
|
|
// Token: 0x04000C00 RID: 3072
|
|
DestinationScopeMismatch
|
|
}
|
|
}
|